Kourai · formerly IGNIS
The robot
What Kourai is, how it is built and what technology is inside.
01
What is Kourai?
Kourai is a humanoid robot 90 cm tall that we, as students, design and build ourselves: from the mechanics and electronics to the AI.
Humanoid robots are still expensive and mostly found in research labs. We want to show that one can be built with 3D printing, a Raspberry Pi and openly available AI models, and that it can look friendly enough to fit into everyday life.
The project used to be called IGNIS.
02
Structure

Select a point to learn more about that part.
Head
A friendly face that deliberately avoids looking human. Room for camera and microphone.
Torso
Houses the Raspberry Pi 5, the PCA9685 boards and the power supply.
Arms
Together with the head about 6 to 12 more servos. Still being designed.
Electronics
The Pi drives the servos via I²C and PCA9685 and talks to the AI PC over the network.
Legs
2 × 6 degrees of freedom, about 43 cm long, servos 40 × 40 × 20 mm.
03
Technical specs
| Property | Value |
|---|---|
| Dimensions | |
| Height | 90 cm (legs ~43 cm) |
| Mechanics | |
| Legs | 2 × 6 DOF (12 servos) |
| Servo size | 40 × 40 × 20 mm |
| Additional servos | ~6 to 12 (arms/head)(to be updated) |
| Electronics | |
| Controller | Raspberry Pi 5 |
| Servo driver | PCA9685 PWM boards |
| AI | |
| On the PC (GPU) | Movement decision model + Qwen 4B (speech) |
| On the Pi | 2 smaller models running directly on the device |
| Structure | |
| Material | PETG-CF |
| Printer | Bambu Lab P1S (AMS) |
04
System architecture
The Raspberry Pi 5 inside the robot drives all servos through PCA9685 PWM boards. Demanding AI models run on the GPU of a PC that the Pi reaches over the network. Two smaller models run directly on the Pi.